 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| APLUS MAKE YOUR PRODUCTION A-PLUS APEXX04 Series DATA SHEET APLUS INTEGRATED CIRCUITS INC. Sales E-mail: sales@aplusinc.com.tw Technology E-mail: service@aplusinc.com.tw Address: 3 F-10, No. 32, Sec. 1, Chenggung Rd., Taipei, Taiwan 115, R.O.C. (115) 32 3 10. TEL: 886-2-2782-9266 FAX: 886-2-2782-9255 WEBSITE : http: //www.aplusinc.com.tw APEXX04 Series 1.0 General Description The APEXX04 series are very low cost voice and melody synthesizer with 4-bits CPU. They have various features including 4-bits ALU, ROM, RAM, I/O ports, timers, clock generator, voice and melody synthesizer, and PWM (Direct drive) output, etc. The audio synthesizer contains one voice-channel and two melody-channels. Furthermore, they consist of 27 instructions in these devices. With CMOS technology and halt function can minimize power dissipation. Their architectures are similar to RISC, with two stages of instruction pipeline. They allow all instructions to be executed in a single cycle, except for program branches and data table read instructions (which need two instruction cycles). 2.0 Features (1) Single power supply can operate from 2.4V to 5.5V at 4MHz or 8MHz. (2) Program ROM: 8k x 10 bits (3) 1 set of 15-bits DPR can access up to 32k x 10 bits melody data memory space, and 1 set of 15-bits VPR can access up to 32k x 10 bits voice data memory space. Product APE0504 APE1004 (4) Data Registers: a). 96 x 4-bits data RAM (00-5Fh) b). Unbanked special function registers (SFR) range: 00h-2Fh (5) I/O Ports: a). PRA: 4-bits I/O Port A (10h) can be programmed to input/output individually. (Register control) (6) On-chip clock generator: Resistive Clock Drive (RM) (7) Timer: 1-set Voice Interrupt (Timer0: a 9-bits auto-reload timer/counter). (8) Stack: 2-level subroutine nesting. (9) Built-in 4 Level Volume Control can be programmed. (10) Built-in IR Carry Output: Port A[1] can be configured as IR pin by 38k / 56kHz. (Mask option) (11) External Reset: Port A[3] can be configured as reset pin. (Mask opton) (12) HALT and Release from HALT function to reduce power consumption (13) Watch Dog Timer (WDT) (14) Instruction: 1-cycle instruction except for table read and program branches which are 2-cycles (15) Number of instruction: 27 (16) DAC: 1 channel voice and dual tone melody synthesizer (One 8-bits PWM output). Voice Duration (sec) Voice Pointer (VPR) ROM Size (10-bit) 5 10 14-bits 15-bits 16k 32k 1 Rev 1.3 2003/8/18 APEXX04 Series FIGURE 1 : ROM Map of APEXX04 Series PC[12:0] 13-bit x 2 STACK 15-bit Data Pointer 15-bit Voice Pointer Reset Vector 00000h Reserved for Testing 000FEh 000FFh-00400h 00401h 00000h-01FFFh Program ROM 00000h-07FFFh Data ROM for Voice & Melody 2 Rev 1.3 2003/8/18 APEXX04 Series 3.0 Pin Description Pad Name PWM2 PWM1 Vdd1~2 PRA0, PRA2 Pin Attr. O O Power I/O PWM2 output. PWM1 output. Power supply during operation. I/O port can be programmed to input/output individually. Input type with weak pull-low or fix-input-floating capability. Buffer Output type. I/O port can be programmed to input/output individually. Input type with weak pull-low or fix-input-floating capability. Buffer Output type. Mask option selected as an IR Carrier Output with 38k / 56kHz I/O port can be programmed to input/output individually. Input type with weak pull-low or fix-input-floating capability. Buffer Output type. Mask option selected as an external RESET pin with weak pull-low capability. RM mode Oscillator input Ground Potential Description PRA1 / IR I/O PRA3 / Reset I/O OSC GND1~2 I Power 4.0 DC Characteristics Symbol Vdd Isb Iop Iih Ioh Iol Cout dF/F dF/F Parameter Operating voltage Supply current Standby Operating Vdd 3 4.5 3 4.5 3 4.5 3 4.5 3 4.5 3 4.5 -5 -10 Min. 2.4 Typ. 3 Max. 5.5 1 1 Unit V uA mA uA Condition depending on Freq. 4MHz, RM, in HALT Mode 4MHz, RM, IO Floating Input ports with weak pull-low 4MHz, RM (IO ports) 4MHz, RM (Full scale) Fosc(3v- 2.4v) Fosc (3v) Vdd=3V, Rosc=430k, 4MHz Input current (Internal pull low) Output-high current Output-low current DAC output current (8-level option) Frequency stability Fosc lot variation 2 7 4 10 -4 -10 8.5 17.5 0.8 ~ 4.8 0.9 ~ 6.5 5 10 mA mA % % 3 Rev 1.3 2003/8/18 APEXX04 Series FIGURE 2 : Frequency vs. Rosc (at 3V) Resistor (Rosc ohms) Frequency (MHz) 110k 14.84 200k 8.25 300k 5.54 430k 3.92 R o sc vs F re q. 20 Freq. (MHz) 15 10 5 0 0 100 1 4 .8 4 8 .25 5 .54 3 .92 200 300 400 500 R os c (k o h m ) 5.0 Application Circuit xxxx 4 Rev 1.3 2003/8/18 APEXX04 Series 6.0 Bonding Diagram ROM Y Pad Size: 80 um x 80 um * The IC substrate must be connected to GND. PRA3 1 PWM2/Cout GND2 10 11 Vdd2 Vdd1 2 (0, 0) PWM1 3 GND1 4 5 OSC 6 PRA0 7 PRA1 8 PRA2 9 X Pad # 1 2 3 4 5 6 Pad Name PWM2 Vdd1 PWM1 GND1 Vdd2 OSC X 57 58 253 404 565 675 Y 253 58 57 58 87 87 Pad # 7 8 9 10 11 Pad Name PRA0 PRA1 PRA2 GND2 PRA3 X 785 895 1005 995 995 Y 87 87 87 231 341 Chip Size : APE0504 : 1166 um x 1094 um APE1004 : 1166 um x 1206 um 5 Rev 1.3 2003/8/18 |
Price & Availability of APEXX04
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |